If you want to reprint some parts and get the same aesthetics, here are the filaments we use internally to manufacture.
Gray - Fiberology Easy PLA Gray - 0.3 layer
Black - Fiberology Easy PLA Black - 0.3 layer
Position the parts as shown in the table below and you'll end up with pretty much the same results.
Image | Slicer orientation & support | Name | Link |
| ​ | 00098 Front cover | ​https://a360.co/3iwEBwl​ |
​ | ​ | 00099 Battery cover | ​https://a360.co/3bY32l5​ |
​ | ​ | 00130 Addon quarter cover | ​https://a360.co/3sMLv5p​ |
Image | Slicer orientation & support | Name | Link |
​ | ​ | 00173 Torque plate | ​https://a360.co/394rtLP​ |
​ | ​ | 00191 Wheel rim | ​https://a360.co/3966jg4​ |
​ | ​ | 00175 Wheel mount A | ​https://a360.co/3p6bdzv​ |
​ | ​ | 00190 Wheel mount B | ​https://a360.co/35YLtxk​ |
​ | ​ | 04003-G Wheel cap | ​https://a360.co/3iA1uyJ​ |
Image | Slicer orientation & support | Name | Link |
​ | ​ | 00185 MEB Box | ​https://a360.co/39SG7F1​ |
​ | ​ | 00188 MEB Cover | ​https://a360.co/2M8Twkj​ |
​ | ​ | 00187 Camera mount | ​https://a360.co/2Mc3zoJ​ |
​ | ​ | 00183 Wifi modem adapter | ​https://a360.co/3qIfKZs​ |
Image | Slicer orientation & support | Name | Info |
​ | ​ | 00189 Universal mounting plate | ​https://a360.co/2LK7U2E​ |
​ | ​ | 01113 PhantomX Pincher adapter | ​https://a360.co/3qGAnF4​ |
​ | ​ | WidowX 250 adapter | ​https://a360.co/3sJ2MfJ​ |
​ | ​ | Hokuyo URG-04-LX adapter | ​https://a360.co/3bY5GHk​ |